Chapter 8 The 9130 VSWR/DTF Reflection Measurement Option
Calibration
142 9102 Handheld Spectrum Analyzer Software version 5.31
Calibration
Before starting VSWR/DTF measurement the instrument needs to be
calibrated. For reference calibration a calibration standard with an
open, short and load reference connector has to be connected. Aero-
flex offers calibration sets Open/Short/Load Type 7/16“ male and Type
N male as well as test port extension cables with different connector
standards (N and 7/16“ DIN). For ordering information refer to
“Options and accessories” on page 5. For a description of the calibra-
tion procedure within the measurement modes reflection, distance to
fault and cable loss refer to Chapter 9, Chapter 10 and Chapter 11.
To Next Page
