Aeroflex 9102 - Service Commands; Service:battery; Service:battery:serialnumber; Service:bootversion

Chapter 16 SCPI Command Reference
Service commands
9102 Handheld Spectrum Analyzer Software version 5.31
331
Service commands
These commands are used for information regarding the status of the
9102.
:SERVice:BOOTversion?
:SERVice:BOOTversion:DATe?
:SERVice:BATTery
:SERVice:BATTery:SERialnumber?
Syntax
:SERVice:BOOTversion?
Parameters
There are no parameters.
Command
There is only a query form of this command available.
Query
Reads and returns the version of the boot software of your Aeroflex 9102.
The command will return a string.
Example
:SERVice:BOOTversion?
String returned in this example: "2.00".
Syntax
:SERVice:BOOTversion:DATe?
Parameters
There are no parameters.
Command
There is only a query form of this command available.
Query
Reads and returns the date of the Boot Software of your Aeroflex 9102.
The command will return a string.
Example
:SERVice:BOOTversion:DATe?
String returned in this example: "2004/10/22"
.
Syntax
:SERVice:BATTery?
Parameters
There are no parameters.
Command
There is only a query form of this command available.
Query
Reads and returns the the current loading state of the battery in %. The
command will return an integer.
Example
:SERVice:BATTery?
String returned in this example: "40".
Syntax
:SERVice:BATTery:SERialnumber?
Parameters
There are no parameters.
Command
There is only a query form of this command available.
Query
Reads and returns the serial number of the battery of your Aeroflex 9102.
The command will return a string.
Example
:SERVice:BATTery:SERialnumber?
String returned in this example: "00300402"
.