Aeroflex 9102 - About the cable loss mode; Selecting the measurement mode

Chapter 9 Reflection Operation
Setting up the level parameters
152 9102 Handheld Spectrum Analyzer Software version 5.31
3 Select a new scale by entering a new number per division numeri-
cally and pressing the E
NTER or MHZ/DB/ΜS key, or by pushing the
U
P/DOWN cursor keys.
Setting the maximum for
reflection factor
1 In the main menu, push the Max Refl Factor softkey or select Level
followed by
Max Refl Factor. Alternatively, push the REF function
key.
The Reference Level input field opens.
2 Enter the new maximum reflection factor either using the numeric
keys, closing the input field with the appropriate enter key, or with
the U
P/DOWN arrow keys.
The new maximum reflection factor appears at the top of the
vertical axis.
Changing the scale for
reflection factor
The scale for the vertical axis (power) can be changed in the range
from 0 to 2000 mRho per division (vertical line in the displayed grid) as
follows:
1 In the main menu, select
Level.
2 Push the
Refl. Factor Scale softkey.
The
Refl. Factor Scale input field opens.
3 Select a new scale by entering a new number per division numeri-
cally and pressing the E
NTER or MHZ/DB/ΜS key, or by pushing the
U
P/DOWN cursor keys.
Setting the maximum for
reflection power
1 In the main menu, push the Max Refl Power softkey or select Level
followed by
Max Refl Power. Alternatively, push the REF function
key.
The Reference Level input field opens.
2 Enter the new maximum reflection factor either using the numeric
keys, closing the input field with the appropriate enter key, or with
the U
P/DOWN arrow keys.
The new maximum reflection factor appears at the top of the
vertical axis.
Changing the scale for
reflection power
The scale for the vertical axis (power) can be changed in the range
from 1 to
200 % per division (vertical line in the displayed grid) as follows:
1 In the main menu, select
Level.
2 Push the
Refl. Power Scale softkey.
The
Refl. Power Scale input field opens.