Aeroflex 9102 - Calculate:marker:{A|B|C|D|E|F}:X:distance; Calculate:marker:{A|B|C|D|E|F}:X:time; Calculate:marker:{A|B|C|D|E|F}:X[:Frequency]

Chapter 16 SCPI Command Reference
Calculate commands
9102 Handheld Spectrum Analyzer Software version 5.31
323
:CALCulate:MARKer:{A|B|C|D|E|F}:X[:FREQuency]
:CALCulate:MARKer:{A|B|C|D
|E|F}:X:TIMe
:CALCulate:MARKer:{A|B|C|D|E|F}:X:DISTance
Syntax
:CALCulate:MARKer:{A|B|C|D|E|F}:X[:FREQuency] <real1>
Parameters
real1 is a floating point real number.
The minimum value for real1 is 0, the maximum value 7500000000. The
minimum resolution possible for real1 is 1. The default value for real1 is
1800000000.
Command
This command sets the marker frequency for one of the six markers of the
Aeroflex 9102 when in spectrum analysis mode. The physical dimension of
real1 is Hertz.
Query
The query form of this command will return the current marker frequency
setting of the respective marker of the Aeroflex 9102 (A, B, C , D, E or F).
The string delivered back will contain one real number.
Example
:CALCulate:MARKer:C:X 1500000000
:CALCulate:MARKer:C:X?
The value returned in this example is: "1500000000".
Syntax
:CALCulate:MARKer:{A|B|C|D|E|F}:X:TIMe <real1>
Parameters
real1 is a floating point real number.
The minimum value for real1 is 0.001, the maximum value 250.0. The
minimum resolution possible for real1 is 1. The default value for real1 is
0.0432.
Command
This command sets the marker time for zero-span measurements for one
of the six markers of the Aeroflex 9102. The physical dimension of real1
is seconds.
Query
The query form of this command will return the current marker time setting
of the respective marker of the Aeroflex 9102 (A, B, C, D, E or F). The string
delivered back will contain one real number.
Example
:CALCulate:MARKer:C:X:TIME 0.5
:CALCulate:MARKer:C:X:TIME?
The value returned in this example is: "0.5".
Syntax
:CALCulate:MARKer:{A|B|C|D|E|F}:X:DISTance <real1>
Parameters
real1 is a floating point real number.
The minimum value for real1 is 0.0, the maximum value 2000.0
. The
minimum resolution possible for real1 is 1. The default value for real1 is
0.0432
.
Command
This command sets the marker time for distance to fault measurements for
one of the six markers of the Aeroflex 9102. The physical dimension of
real1 is meter or feet, respectively.
Query
The query form of this command will return the current DTF marker length
setting of the respective marker of the Aeroflex 9102 (A, B, C, D, E or F).
The string delivered back will contain one real number.
Example
:CALCulate:MARKer:C:X:DISTance 10.5
:CALCulate:MARKer:C:X:DISTance?
The value returned in this example is:
"10.5".