10
9102 Handheld Spectrum Analyzer Software version 5.31 163
Chapter 10 Distance to Fault Operation
This chapter describes the instrument’s functions that are specific to
the reflection mode. Topics discussed in this chapter are as follows:
– “About the distance to fault mode” on page 164
– “Selecting the measurement mode” on page 165
– “Preparative steps” on page 165
– “Selecting the measurement unit” on page 165
– “Specifying the cable length” on page 166
– “Specifying cable settings” on page 166
– “Setting center frequency and span” on page 167
– “Distance to fault calibration” on page 168
– “Specifying the level parameters” on page 170
– “Setting up the trace” on page 171
– “Using limits” on page 171
– “Viewing the distance to fault parameters” on page 171
To Next Page
