Chapter 15 9100 Data Exchange Software
About the 9100 Data Exchange Software
224 9102 Handheld Spectrum Analyzer Software version 5.31
About the 9100 Data Exchange Software
The 9102 is delivered with a software product, the 9100 Data
Exchange Software. This is a tool to load and display measurements
from the 9102 to the PC and to install software updates on the 9102.
Installation requirements
To install the 9100 Data Exchange Software, you need
– a PC with Pentium processor or equivalent
– Windows 98SE, Windows NT or later versions
– a minimum of 32 megabytes of RAM
– 50 megabytes of free space on the hard disk
– a free serial interface or a LAN connection
Understanding the license conditions
Before installing the 9100 Data Exchange Software, ensure that you
understand the license terms which can be found in the appendix
“Software License” on page 379. The software may only be installed on
one computer at any one time!
Installing the software
If you received the software on a CD, just insert the CD in the CD drive
of your PC.
Run 9100DataExchange.exe.
This will start the install wizard which will copy the required files onto
your PC.
Follow the instructions given by the install wizard.
By default, the install wizard will store the program files in the following
directory (assuming an English Windows installation):
C:\Program files\Aeroflex\9100 Data Exchange.
To Next Page
