Aeroflex 9102 - Managing communication systems for channel power measurements

15
9102 Handheld Spectrum Analyzer Software version 5.31 223
Chapter 15 9100 Data Exchange Software
This chapter describes how to install and use the 9100 Data Exchange
Software. The topics discussed in this chapter are as follows:
– “About the 9100 Data Exchange Software” on page 224
– “Installation requirements” on page 224
– “Understanding the license conditions” on page 224
– “Installing the software” on page 224
– “Starting the software” on page 225
– “Connecting the PC to the 9102” on page 226
– “Loading measurement results from the 9102” on page 227
– “Saving, loading and printing results on the PC” on page 231
– “Creating screen shots” on page 235
– “Working with measurement results” on page 236
– “Defining and loading limit templates” on page 239
– “Defining and loading external coupling parameters” on page 243
– “Managing communication systems for channel power measure-
ments” on page 245
– “Managing cable types for distance-to-fault measurements” on
page 246
– “Managing antenna factors for EMF measurements” on page 248
– “Managing cable factors for EMF measurements” on page 250
– “Working with settings” on page 251
– “Managing files on the PC and on the 9102” on page 252
– “Including the GPS position in the trace” on page 255