Chapter 1 Overview
What’s new
4 9102 Handheld Spectrum Analyzer Software version 5.31
Version 4.10 New features:
– Supports 100 Hz and 300 Hz RBW filters, 10 kHz span and 250 s
sweep time in 9101B and 9102B models. Those features are not
available for older instruments.
Improvements:
– SCPI remote control bugfix for marker value.
Version 4.01 New features:
– New EMF (EMI) Measurement Option.
For an extensive description of the new EMF (EMI) measurement
mode available with this option refer to Chapter 11 “EMF (EMI)
Operation”.
– New features within the 9100 Data Exchange Software supporting
the new EMF (EMI) Measurement Option.
For further details refer to Chapter 14 “9100 Data Exchange Soft-
ware”.
– New trace finder functionality.
For further details refer to “Trace finder” on page 21.
Version 3.10 New features:
– New VSWR/DTF Reflection Measurement Option including the
measurement modes reflection, distance to fault and cable loss
– Marker functionality: six markers for all measurement modes,
markers can be set on trace A and trace B.
– New look and feel of the parameter windows
– Direct printing
– New Printer Config menu
– RMS Option with RMS detector
– Absolute and relative display within Transmission mode
– Trace offset by division within Transmission mode
– Trace Memory menu: functions Store Trace and Recall Trace act on
both traces.
– Channel Power mode: Measure menu moved to main menu.
– Specific backlight display settings for operation on battery to save
energy.
Improvements:
– Full support of external device in the Mode window
– Improved frequency counter
– Improved Level StepDown functionality of MinValue
To Next Page
Loading...
