2
9102 Handheld Spectrum Analyzer Software version 5.31 13
Chapter 2 General Operation
This chapter describes the instrument’s functions that are independent
of the selected mode. Topics discussed in this chapter are as follows:
– “Connecting the 9102 Handheld Spectrum Analyzer” on page 14
– “Powering up the unit” on page 17
– “Starting measurements” on page 17
– “Using the front panel” on page 17
– “Selecting the measurement mode” on page 29
– “Working with the markers” on page 31
– “Using limit lines” on page 34
– “Printing” on page 38
– “Logging the current position (GPS-assisted)” on page 39
– “Controlling the 9102 from a PC” on page 41
– “Returning from remote control to local mode” on page 41
– “Checking general settings” on page 41
– “Working with stored settings” on page 52
– “Restoring factory settings for all modes” on page 54
To Next Page
Loading...
