3
9102 Handheld Spectrum Analyzer Software version 5.31 55
Chapter 3 Spectrum Analysis Operation
This chapter describes the instrument’s functions that are specific to
the spectrum analysis mode. Topics discussed in this chapter are as
follows:
– “Selecting the measurement mode” on page 56
– “Changing the frequency settings” on page 56
– “Selecting RBW, VBW and SWT” on page 59
– “Setting up the level parameters” on page 60
– “Changing the input impedance” on page 62
– “Applying special functions on the signal” on page 64
– “Setting up the trace” on page 67
– “Storing and loading traces” on page 73
– “Special measurement functions” on page 75
– “Viewing the spectrum analysis mode parameters” on page 79
To Next Page
Loading...
