AudioCodes Mediant 800B - Page 1089

Version 7.2 1089 Mediant 800B Gateway & E-SBC
User's Manual 72. Configuration Parameters Reference
Parameter Description

[afl] Auxiliary Files Loading = Loading of Auxiliary files.
 [dr] Device Reset = Resetting of the device through the
Maintenance Actions page.
Note: For this option to take effect, a device reset is required.
 [fb] Flash Memory Burning = Saving configuration with burn to
flash (in the Maintenance Actions page).
 [swu] Device Software Update = S
oftware updates (i.e., loading of
cmp file) through the Software Upgrade Wizard.
 [ard] Access to Restricted Domains = Access to restricted Web
pages:

(1) ini parameters (AdminPage)

(2) General Security Settings

(3) Configuration File


(5) License Key


(7) Access List

(8) Web User Accounts
 [naa] Non-Authorized Access = Attempts to log in to the Web
interface with a false or empty username or password.
 [spc] Sensitive Parameters Value Change = Changes made to
"sensitive" parameters:

(1) IP Address

(2) Subnet Mask

(3) Default Gateway IP Address

(4) ActivityListToLog
 [ll] Login and Logout = Web login and logout attempts.
 [cli] = CLI commands entered by the user.
 [ae] Action Executed = Logs user actions that are not related to
parameter changes. The actions can include, for example, file
uploads, file delete, lock-unlock maintenance actions, LDAP clear
cache, register-unregister, and start-stop trunk. In the Web, these
actions are typically done by clicking a button (e.g., the LOCK
button).
Note: For the ini file parameter, enclose values in single quotation
marks, for example: ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu',
'ard', 'naa', 'spc'.
[EnableParametersMonitoring] Enables the monitoring, through Syslog messages, of parameters
that are modified on-the-fly.
 [0] = (Default) Disable

[1]
= Enable
isdn-facility-trace
[FacilityTrace]
Enables ISDN traces of Facility Information Elements (IE) for ISDN
call diagnostics. This allows you to trace all the parameters
contained in the Facility IE and view them in the Syslog.
 [0] Disable (default)
 [1] Enable
Note: For this feature to be functional, the GWDebugLevel
parameter must be enabled (i.e., set to at least level 1).
Debug Recording Destination
IP
Defines the IP address of the server for capturing debug recording.