User's Manual  230  Document #: LTRT-10632 
 
  Mediant 800B Gateway & E-SBC 
Parameter  Description 
DNS Server 2 
dns-server-2 
[DhcpServer_DNSServer2] 
Defines the IP address (IPv4) of the secondary DNS server that 
the DHCP server assigns to the DHCP client. The value is sent 
in DHCP Option 6 (Domain Name Server). 
The default value is 0.0.0.0. 
NetBIOS  
NetBIOS Name Server 
netbios-server 
[DhcpServer_NetbiosNameServer] 
Defines the IP address (IPv4) of the NetBIOS WINS server that 
is available to a Microsoft DHCP client. The value is sent in 
DHCP Option 44 (NetBIOS Name Server). 
The default value is 0.0.0.0. 
NetBIOS Node Type 
netbios-node-type 
[DhcpServer_NetbiosNodeType] 
Defines the node type of the NetBIOS WINS server for a 
Microsoft DHCP client. The value is sent in DHCP Option 46 
(NetBIOS Node Type). 
  [0] Broadcast (default) 
  [1] peer-to-peer 
  [4] Mixed 
  [8] Hybrid 
Time and Date 
NTP Server 1 
ntp-server-1 
[DhcpServer_NTPServer1] 
Defines the IP address (IPv4) of the primary NTP server that 
the DHCP server assigns to the DHCP client. The value is sent 
in DHCP Option 42 (Network Time Protocol Server). 
The default value is 0.0.0.0. 
NTP Server 2 
ntp-server-2 
[DhcpServer_NTPServer2] 
Defines the IP address (IPv4) of the secondary NTP server that 
the DHCP server assigns to the DHCP client. The value is sent 
in DHCP Option 42 (Network Time Protocol Server). 
The default value is 0.0.0.0. 
Time Offset 
time-offset 
[DhcpServer_TimeOffset] 
Defines the Greenwich Mean Time (GMT) offset (in seconds) 
that the DHCP server assigns to the DHCP client. The value is 
sent in DHCP Option 2 (Time Offset). 
The valid range is -43200 to 43200. The default is 0. 
Boot File 
TFTP Server Name 
tftp-server-name 
[DhcpServer_TftpServer] 
Defines the IP address or name of the TFTP server that the 
DHCP server assigns to the DHCP client. The TFTP server 
typically stores the boot file image, defined in the 'Boot file 
name' parameter (see below). The value is sent in DHCP 
Option 66 (TFTP Server Name).  
The valid value is a string of up to 80 characters. By default, no 
value is defined.