User's Manual 382 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Table 17-7: Proxy Sets Table and Proxy Address Table Parameter Description
Parameter Description
SRD
voip-network proxy-set > srd-id
[ProxySet_SRDName]
Assigns an SRD to the Proxy Set.
Note:
The parameter is mandatory and must be configured first before
you can configure the other parameters in the table.
To configure SRDs, see Configuring SRDs on page 347.
General
Index
configure voip > voip-network
proxy-set
[ProxySet_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name
proxy-name
[ProxySet_ProxyName]
Defines a descriptive name, which is used when associating the row
in other tables.
The valid value is a string of up to 40 characters.
Note: Each row must be configured with a unique name.
Gateway IPv4 SIP Interface
gwipv4-sip-int-name
[ProxySet_GWIPv4SIPInterfac
eName]
Assigns an IPv4-based SIP Interface for Gateway calls to the Proxy
Set.
Note:
At least one SIP Interface must be assigned to the Proxy Set.
The parameter appears only if you have configured a network
interface with an IPv4 address in the IP Interfaces table (see
Configuring IP Network Interfaces on page 146).
To configure SIP Interfaces, see Configuring SIP Interfaces on
page 357.
SBC IPv4 SIP Interface
sbcipv4-sip-int-name
[ProxySet_SBCIPv4SIPInterfa
ceName]
Assigns an IPv4-based SIP Interface for SBC calls to the Proxy Set.
Note:
At least one SIP Interface must be assigned to the Proxy Set.
The parameter appears only if you have configured a network
interface with an IPv4 address in the IP Interfaces table (see
Configuring IP Network Interfaces on page 146).
To configure SIP Interfaces, see 'Configuring SIP Interfaces' on
page 357.
Gateway IPv6 SIP Interface
gwipv6-sip-int-name
[ProxySet_GWIPv6SIPInterfac
eName]
Assigns an IPv6-based SIP Interface for Gateway calls to the Proxy
Set.
Note:
At least one SIP Interface must be assigned to the Proxy Set.
The parameter appears only if you have configured a network
interface with an IPv6 address in the IP Interfaces table.
SBC IPv6 SIP Interface
sbcipv6-sip-int-name
[ProxySet_SBCIPv6SIPInterfa
ceName]
Assigns an IPv6-based SIP Interface for SBC calls to the Proxy Set.
Note:
At least one SIP Interface must be assigned to the Proxy Set.
The parameter appears only if you have configured a network
interface with an IPv6 address in the IP Interfaces table.
TLS Context Index
tls-context-name
[ProxySet_TLSContextName]
Assigns a TLS Context (SSL/TLS certificate) to the Proxy Set.
By default, no TLS Context is assigned. If you assign a TLS Context,
the TLS Context is used as follows:
To Next Page
Loading...
