EasyManuals Logo

AudioCodes Mediant 800B User Manual

AudioCodes Mediant 800B
1338 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #565 background imageLoading...
Page #565 background image
Version 7.2 565 Mediant 800B Gateway & E-SBC
User's Manual 25. Manipulation
Parameter Description
The default value is the asterisk (*) symbol (i.e., any source prefix).
Calling Name Prefix
calling-name-prefix
[_CallingNamePrefix]
Defines the caller name (i.e., caller ID) prefix.
You can use special notations for denoting the prefix. For example, to
denote calls without a calling name, use the $ sign. For a description of
available notations, see 'Dialing Plan Notation for Routing and
Manipulation Tables' on page 1051.
The default value is the asterisk (*) symbol (i.e., any calling name
prefix).
Source Trunk Group ID
src-trunk-group-id
[_SrcTrunkGroupID]
Defines the source Trunk Group ID from where the Tel-to-IP call was
received.
The default value is -1, which denotes any Trunk Group.
Note: The parameter is applicable only to the Calling Name
Manipulation for Tel-to-IP Calls table.
Source IP Address
src-ip-address
[_SourceAddress]
Defines the source IP address of the caller for IP-to-Tel calls. The
source IP address appears in the SIP Contact header in the INVITE
message.
The default value is the asterisk (*) symbol (i.e., any IP address). The
source IP address can include the following wildcards:
ï‚§ "x" wildcard: represents single digits. For example, 10.8.8.xx
represents all IP addresses between 10.8.8.10 to 10.8.8.99.
ï‚§ "*" (asterisk) wildcard: represents any number between 0 and 255.
For example, 10.8.8.* represents all IP addresses between 10.8.8.0
and 10.8.8.255.
Note: The parameter is applicable only to the Calling Name
Manipulation for IP-to-Tel Calls table.
Source Host Prefix
src-host-prefix
[_SrcHost]
Defines the URI host name prefix of the incoming SIP INVITE message
in the From header.
The default value is the asterisk (*) symbol (i.e., any source host prefix).
Note:
ï‚§ The parameter is applicable only to the Calling Name Manipulation
for IP-to-Tel Calls table.
ï‚§ If the P-Asserted-Identity header is present in the incoming INVITE
message, the value of the parameter is compared to the P-Asserted-
Identity URI host name (instead of the From header).
Destination Host Prefix
dst-host-prefix
[_DestHost]
Defines the Request-URI host name prefix of the incoming SIP INVITE
message.
The default value is the asterisk (*) symbol (i.e., any destination host
prefix).
Note: The parameter is applicable only to the Calling Name
Manipulation for IP-to-Tel Calls table.
Action
Stripped Characters From
Left
remove-from-left
[_RemoveFromLeft]
Defines the number of characters to remove from the left of the calling
name.
For example, if you enter 3 and the calling name is "company:john", the
new calling name is "pany:john".
Stripped Characters From
Defines the number of characters to remove from the right of the calling

Table of Contents

Other manuals for AudioCodes Mediant 800B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 800B and is the answer not in the manual?

AudioCodes Mediant 800B Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 800B
CategoryGateway
LanguageEnglish

Related product manuals