Version 7.2 621 Mediant 800B Gateway & E-SBC
User's Manual 27. Configuring Supplementary Services
Parameter Description
[ISDNSuppServ_LocalPhoneNumber]
number is used for the following functionalities:
ï‚§ Validation of source (calling) number for Tel-to-IP
calls
ï‚§ Mapping between local and global (E.164) numbers
between Tel and IP sides respectively
Module
module
[ISDNSuppServ_Module]
Defines the device's module number to which the
endpoint is connected.
Port
port
[ISDNSuppServ_Port]
Defines the port number on the module to which the
endpoint is connected.
User ID
user-id
[ISDNSuppServ_UserId]
Defines the User ID for registering the endpoint to a
third-party softswitch for authentication and/or billing.
User Password
user-password
[ISDNSuppServ_UserPassword]
Defines the user password for registering the endpoint to
a third-party softswitch for authentication and/or billing.
Note: For security, the password is displayed as an
asterisk (*).
CFB Phone Number
cfb-to_phone-number
[ISDNSuppServ_CFB2PhoneNumber]
Defines the phone number for BRI Call Forward Busy
(CFB) services. If the BRI extension is currently in use,
the device forwards the call to this number.
Note:
ï‚§ The parameter is applicable only to BRI interfaces.
ï‚§ To enable BRI call forwarding services, see the
BRICallForwardHandling parameter.
For more information on configuring local handling of BRI
call forwarding, see Local Handling of BRI Call
Forwarding on page
598.
CFNR Phone Number
cfnr-to_phone-number
[ISDNSuppServ_CFNR2PhoneNumber]
Defines the phone number for BRI Call Forward No
Reply (CFNR) services. If the BRI extension does not
answer the call within a user-
defined timeout (see the 'No
Reply Time' parameter below), the device forwards the
call to this number.
Note:
ï‚§ The parameter is applicable only to BRI interfaces.
ï‚§ To enable BRI call forwarding services, see the
BRICallForwardHandling parameter.
For more information on configuring local handling o
call forwarding, see Local Handling of BRI Call
Forwarding on page
598.