Version 7.2 779 Mediant 800B Gateway & E-SBC
User's Manual 38. Advanced SBC Features
e. When you have received the signed certificate, install it on the device as the
"Device Certificate" and install the CA's root certificate into the device's trusted
root store ("Trusted Certificates").
For more information on CSR, see 'Assigning CSR-based Certificates to TLS
Contexts' on page 117.
2. Configure the keep-alive interval with the WebSocket client:
a. Open the Transport Settings page (Setup menu > Signaling & Media tab > SIP
Definitions folder > Transport Settings), and then in the 'WebSocket Keep-
Alive Period' field (WebSocketProtocolKeepAlivePeriod), enter the keep-alive
interval:
Figure 38-6: Configuring Keep-alive with WebSocket Client
b. Click Apply.
3. Configure a SIP Interface for the WebRTC clients that identifies WebSocket traffic:
a. Open the SIP Interfaces table (see 'Configuring SIP Interfaces' on page 357).
b. Do the following:
♦ From the 'Encapsulating Protocol' drop-down list
(SIPInterface_EncapsulatingProtocol), select WebSocket.
♦ In the 'TLS Port' field, configure the TLS port.
♦ From the 'TLS Context Name' drop-down list, assign the TLS Context that
you configured in Step 1 (e.g., "WebRTC").
Figure 38-7: Configuring SIP Interface for WebRTC Clients
c. Click Apply.
4. Configure an IP Profile for the WebRTC clients:
To Next Page
Loading...
