AudioCodes Mediant 800B - Page 78

User's Manual 78 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Parameter Description
[AdditionalManagementInt
erfaces_InterfaceName]
Network Interfaces on page 146.
Note:
 Only Control- and/or Media-type IP network interfaces can be
associated with additional management interfaces.
 An IP network interface can be associated with only one additional
management interface.
TLS Context Name
tls-context-name
[AdditionalManagementInt
erfaces_TLSContextName]
Assigns a TLS Context (from the TLS Contexts table) to the
management interface. A TLS Context provides secure TLS-based
management access.
For more information on TLS Contexts, see Configuring TLS
Certificate Contexts on page 113.
HTTPS Only
https-only-val
[AdditionalManagementInt
erfaces_HTTPSOnly]
Defines the protocol required for accessing the management
interface.
 [0] HTTP and HTTPS = The management interface can be
accessed over a secured (HTTPS) and an unsecured (HTTP)
connection.
 [1] HTTPS Only = The management interface can be accessed
only over a secured (HTTPS) connection.
 [2] Use global definition = The type of management
connection (HTTP and HTTPS, or HTTPS Only) depends on
the configuration of the global parameter, HTTPSOnly (see
Configuring Secured (HTTPS) Web on page 86).