Version 7.2 871 Mediant 800B Gateway & E-SBC
User's Manual 49. Software Upgrade Wizard
Note:
• The Hitless Upgrade and System Reset Upgrade options appear only if the device
is configured for HA.
• At this stage, you can quit the Software Upgrade wizard without having to reset
the device, by clicking Cancel. However, if you continue with the wizard and start
loading the cmp file, the upgrade process must be completed with a device reset.
6. Click Browse, and then navigate to and select the .cmp file.
7. Click Load File; the device begins to install the .cmp file and a progress bar displays
the status of the loading process:
Figure 49-2: CMP File Loading Progress Bar
When the file is loaded, a message is displayed to inform you.
To Next Page
Loading...
