Barco HDF W series - Rotation

12. Alignment
Image 12-26
Warping, status
12.8.3 Rotation
What can be done ?
The image can be rotated clockwise or counter clockwise until the desired position is reached.
Image 12-27
Rotation
How to start a rotation
1. Press Menu to activate the menus and select Alignment → Warping . (image 12-28, image 12-29)
2. Press ENTER to open the Warping menu. (image 12-30)
3. Use the ▲ or ▼ key to select Rotation.
4. Press ENTER to check the Rotation check box.
5. Use the ► key to open the rotation adjustment. (image 12-31)
6. Use the ◄ or ► key to change the value of the selected adjustment or enter the value with the numeric keys.
R5905158 HDF W SERIES 10/07/2012
141