Barco HDF W series Installation Manual

12. Alignment
Image 12-53
Blanking adjustment
Select Re set to reset all blanking adjustments.
12.10 Contrast-Intensity
Purpose
Contrast : change the contrast of the complete output signal (main and PiP window together) of the projected image.
Intensity : change the brightness of the complete output signal (main and PiP window together) of the projected image.
How to set up
1. Press Menu to activate the menus and select Alignment → Contrast/Intensity. (image 12-54, image 12-55)
2. Press ENTER to select. (image 12-56)
3. Use the ▲ or ▼ key to select Contrast Enh ancement.
Use the ◄ or ► key to change the contrast enhancement until the desired value is reached (adjustable between 0 and 5)
4. Use the ▲ or ▼ key to select Intensity.
Use the ◄ or ► key to change the intensity until the desired value is reached (adjustable between 0 and 255) (image 12-57)
Image 12-54
Main menu, alignment
Image 12-55
Alignment, contrast/intensity
Image 12-56
Contrast enhancement
Image 12-57
Intensity
R5905158 HDF W SERIES 10/07/2012 149

Barco HDF W series Specifications

General

Brand	Barco
Model	HDF W series
Category	Projector
Language	English