Barco HDF W series - Cable Input

8. Input
Image 8-6
SDI set up
First, select the standard. Use the ▲ or ▼ key to select and press ENTER to accept.
Standard :
• 4:2:2 - YCbCr-10
• 4:4:4 - YCbCr-10
•4:4:4-RGB-10
• 4:4:4 - YCbCr-12
•4:4:4-RGB-12
• 4:2:2 - YCrCb-12
Then, select the 3G setting. Use the ▲ or ▼ key to select and press ENTER to accept.
3G-A and 3G-B:
• Direct Mapping
• Dual HD
When Dual HD is selected, it is possible to use Swap links. If Swap links must be used, use the ▲ or ▼ key to select and press
ENTER to accept. The check box will be checked.
Dual HD :
• Swap links
8.2.5 5 cable input
How to select
Select 5 cable and press ENTER to open the selections
70
R5905158 HDF W SERIES 10/07/2012