Barco HDF W series - Specifications of the HDF W26

A. Specifications
Inputs
DVI-I (HDCP including analog RGB YUV), SDI/HDSDI/Dual HDSDI/3G/BarcoLink
Optional Inputs 5-BNC RGBHV (RGBS/RGsB, YUV CS/SOY, Composite video, S-Video); DVI-I (HDCP
including analog RGB YUV) + SDI/HDSDI/Dual HDSDI/3G; 3D (HDMI/DisplayPort)
Input Resolutions
From NTSC up to QXGA (2048x1536)
max. pixel clock 200 MHz
Software tools
Projector Toolset
Control XLR wired + IR, RS232, Wifi, GSM (opt)
Network connection
10/100 base-T, RJ-45 connection, Wifi (optional)
Power Requirements
200-240V / 50-60Hz
Max. power consumption 4,000W
>STBY < 10W
Noise level (typical at 25°C/77°F)" 58dB(A)
Operational ambient temperature 0-40°C / 32°-104°F
Operational humidity 0-80% (non condens)
Dissipation BTU
Max. 13660 BTU/h
Dimensions (WxLxH)
707 x 1025 x 548mm
27.83 x 40.35 x 21.57 inches
Weight 99kg (218.25lbs)
Shipping Dimensions (LxWxH)
1200 x 980 x 760 mm
47.24 x 38.58 x 29.92 inches
Shipping Weight from Factory 151kg (333lbs)
Accessories
Power cord, wireless/XLR wired rugged remote control
Certifications Compliant with UL60950-1 and EN60950-1 complies with FCC rules & regulations, part
15 Class A and CE EN55022 Class A, RoHS
Warranty 2years
A.2 Specifications of the HDF W26
Overview
Projector type
WUXGA three-chip DLP digital projector
Technology 0.96’ DMD™ x3
Resolution 1920x1200
Brightness 26,000 center lumens
23,000 ANSI lumens
Contrast ratio 1,900:1 (standard)
2,400:1 (high contrast mode)
Brightness uniformity 90%
Aspect Ratio 16:10
ScenergiX
Horizontal and vertical edge blending
Lens type TLD+
242 R5905158 HDF W SERIES 10/07/2012