13. Projector Control
Image 13-18
Main menu, projector control
Image 13-19
Projector control, network
Image 13-20
Image 13-21
13.5.4 Wired subnet mask set up
Subnet for Wired and Wifi must be different !
How to set up
1. Press Menu to activate the menus and select P rojector Control → Network. (image 13-22, image 13-23, image 13-24)
2. Use the ▲ or ▼ key to select Subnet Mask under Wired and press ENTER to activate the input box. (image 13-25)
3. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. W hen a digit is entered in that way,
the next character will be s elected automatically.
R5905158 HDF W SERIES 10/07/2012
169
To Next Page
Loading...
Need help?
General
