Barco HDF W series - Shutdown Retarding Time

8. Input
Image 8-23
Main window
Image 8-24
Input, no signal
Image 8-25
No signal, shutdown
8.5.4 Shutdown retarding time
About the shutdown retarding time
The retarding time is the time between no signal is detected and the moment that the projector shuts down.
How to set the retarding time
1. Press Menu to activate the menus and select Input → No S ignal. → Shutdown time (min). (image 8-26, image 8-27, image 8-28)
2. Press ENTER to toggle between [1], [3], [5] and [10] minut
es.
Image 8-26
Main window
Image 8-27
Input, no signal
Image 8-28
76 R5905158 HDF W SERIES 10/07/2012