Barco HDF W series Installation Manual

13. Projector Control
Image 13-41
Network, wireless
Image 13-42
Wireless, DHCP
13.5.9 Wireless fixed IP address set up
Can only be used with a wireless network module installed.
How to set up
1. Press Menu to activate the menus and select Projector Control → Network → Wireless Setup. (image 13-43, image 13-44,
image 13-45, image 13-46)
2. Use the ▲ or ▼ key to select IP Address and press ENTER to activate the input box. (image 13-47)
3. Press ENTER to open the Wireless menu.
4. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. W hen a digit is entered in that way,
the next character will be s elected automatically.
Image 13-43
Main menu, projector control
Image 13-44
Projector control, network
R5905158 HDF W SERIES 10/07/2012 175

Barco HDF W series Specifications

General

Brand	Barco
Model	HDF W series
Category	Projector
Language	English