13. Projector Control
Image 13-38
Open network connection
13.5.8 Wireless DHCP set up
Can only be used with a wireless network module installed.
How to set up
1. Press Menu to activate the menus and select Projector Control → Network → Wireless Setup . (image 13-39, image 13-40,
image 13-41, image 13-42)
2. Press ENTER to open the Wireless menu.
3. Use the ▲ or ▼ key to select DHCP and press ENTER to toggle between [O n] or [Off].
[On] : Wireless DHCP is activated. An automatic IP address is assigned.
[Off] : Wireless DHCP is deactivated. A fixed address must be used.
Image 13-39
Main menu, projector control
Image 13-40
Projector control, network
174 R5905158 HDF W SERIES 10/07/2012
To Next Page
Loading...
