Barco HDF W series Installation Manual

8. Input
Overview
•Configure an input
• Create custom EDID file
• Delete a custom EDID file
8.6.1 Configure an input
Description
Selecting the Standard EDID file or an own created file can be selected from the list of Custom EDID files for the input.
How to configure
1. Press Menu to activate the menus and select Input → EDID → Configure.
2. Press ENTER to open the EDID configuration menu. (image 8-32, image 8-33, image 8-34, image 8-35, image 8-36)
3. Use the ▲ or ▼ key to select the input to configure.
Press ENTER to open the selection list.
The current active file is checked.
4. Use the ▲ or ▼ key to select the correct file.
Press ENTER to select this file.
Press EXIT to return to the EDID Configuration menu.
5. Use the ▲ or ▼ key to select Apply.
Your selection is applied and stored for this input.
The ED ID Co nfiguration menu remains open to confi gure another input.
Or,
use the ▲ or ▼ key to select OK.
Your selection is applied and stored for this input and the EDID configuration menu is closed.
Image 8-32
Main window
Image 8-33
Input, EDID
Image 8-34
EDID, configure
Image 8-35
EDID configuration
78 R5905158 HDF W SERIES 10/07/2012

Barco HDF W series Specifications

General

Brand	Barco
Model	HDF W series
Category	Projector
Language	English