13. Projector Control
Image 13-22
Main menu, projector control
Image 13-23
Projector control, network
Image 13-24
Subnet mask
Image 13-25
13.5.5 Wired default gateway set up
How to set up
1. Press Menu to activate the menus and select P rojector Control → Network. (image 13-26, image 13-27, image 13-28)
2. Use the ▲ or ▼ key to select Default Gateway under Wired and press ENTER to activate the input box. (image 13-29)
3. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the re
mote control or the local keypad. When a digit is entered in that way,
the next character will be s elected automatically.
170
R5905158 HDF W SERIES 10/07/2012
To Next Page
Loading...
