Canon LBP6780x - Page 116

Next, perform the following procedures. (If you want to install the SD card, follow the procedure from Step 2 in
"Installing SD Card".)
If you install the printer and ROM at the same time
1
Connect the power
cord.
"Connecting the Power Cord"
2
Specifying the
printer's initial
settings.
"Turning the Power On and Specifying a Language"
Specifying a type of
printer driver.
"Specifying a Type of Printer Driver"
3
Load paper.
"Loading Paper in the Paper Drawer"
"Loading Paper in the Multi-purpose Tray"
4
Connecting to a
computer.
"Connecting to a Computer"
5
Install the printer
driver.
"For Windows"
"For Macintosh"
6
Check the printing
operation.
Check the operations by Test Page in Windows.
"Basic Operations/Various Information for Windows"
7
Check the ROM
installation.
"Checking the ROM Installation"
8
Specify the settings
for the ROM module
as needed.
For details on the settings for the bar code fonts, see "Bar Code Printing
Guide" included in the User Manual CD-ROM.
If you install ROM afterward (If you are using the printer already)
1
Connect the cables
and cords.
Connect the removed cables and cords again.
2
Check the ROM
installation.
"Checking the ROM Installation"
3
Specify the settings
for the ROM module
For details on the settings for the bar code fonts, see "Bar Code Printing
Guide" included in the User Manual CD-ROM.
㻝㻝㻢㻌㻛㻌㻥㻣㻜