"Specifying the Job Operation Permission for End-Users"
"Locking the Keys on the Control Panel (Key Lock Function)"
"Setting Restrictions for USB Direct Print"
(2) [Remote UI Settings]
It displays whether the Remote UI is set to use the SSL encrypted communication function.
How to change settings
"Changing the Remote UI Settings"
(3) [Key and Certificate Settings]
It displays information on registered keys and certificates.
How to change settings
"Displaying the [Key and Certificate Settings] Page in the Remote UI"
(4) [CA Certificate Settings]
It displays information on registered keys and certificates.
How to change settings
"Displaying the [CA Certificate Settings] Page in the Remote UI"
(5) [IPSec Settings]
It displays the IPSec security policy list.
How to change settings
"Setting the IPSec Encryption Communication Function "
(6) [Display Job History]
It displays whether it is set to allow job history to be displayed.
How to change settings
"Specifying the Setting for Job Log Display"
(7) [IP Address Filter]
It displays information restricting users who can print and change settings.
How to change settings
"Restricting the Users Who Can Print or Perform the Printer Settings"
(8) [MAC Address Filter]
It displays information restricting users who have access.
How to change settings
"Restricting the Users Who Can Access"
(9) [Back to Page Top]
It moves the scroll box up to the top of the page.
NOTE
Changing the settings
You can only change settings when you are logged on in system manager mode.
[License/Other] Page
It displays the pages that the settings for message boards or support links, or registering or updating software are
performed.
㻡㻠㻣㻌㻛㻌㻥㻣㻜
To Next Page
Loading...
