[Contrast] -3 Dark to 0 to +3 Light
If the display is not clear, adjust the contrast or
brightness to the desired level.
[Backlight
Brightness]
[Off], [Level 1], [Level 2], [Level 3]
[Animated
Instruction]
[Off], [On]
Specifies whether the printer should display an
animated picture in the display when a paper
jam occurs or when a toner cartridge is
replaced.
[Show Toner
Gauge]
[Off], [On]
Specifies whether the printer should display
the icon that indicates the toner remaining.
[Set. Comp. Notify] [Off], [1 second], [2 seconds], [3 seconds]
Specifies the display time of messages that are
displayed when the setting completes. If [Off]
is specified, no setting completion message is
displayed.
[Scrolling Speed] [Slow], [Normal], [Fast]
Set the scrolling speed for the message
display on the control panel.
㻡㻢㻣㻌㻛㻌㻥㻣㻜
To Next Page
Loading...
