Canon LBP6780x - Page 566

[Sec. Print Del.
Time]
*2
[1 hour], [2 hours], [3 hours], [6 hours], [12
hours], [24 hours]
jobs are automatically deleted.
Secured print data is saved on the SD card,
and it will not be deleted unless after printed.
However, they will be deleted automatically
when the amount of time specified with this
item has elapsed.
As with secured print data, encrypted
secured print data will be deleted
automatically when the amount of time
specified with this item has elapsed.
Even before the amount of time
specified with this item elapses,
secured print data will be deleted
automatically once the printer is turned
off or a hard or soft reset is performed.
[Secure Job Log]
*1*2
[Off], [On]
If the printer is turned off during printing, the
print log of the job being printed may not be
saved or the total number of printed pages
(page counter) may not be counted.
If [On] is specified for this item, the print log of
the job being printed is saved, and the total
number of printed pages (page counter) is
counted even when you turn the printer OFF.
If [On] is specified for this item, printing
speed drops.
[Select PDL
(PnP)]
*1
[UFR II], [UFR II XPS], [PCL5e], [PCL6],
[PS3], [XPS (Direct)]
If you want to connect the printer
and computer with a USB cable
The printer driver for this printer may be
installed automatically when the USB cable
is connected.
You can select the type of the printer driver
("UFR II", "UFR II XPS", "PCL5e", "PCL6",
"PS3", or "XPS (Direct)") to be installed in
this item at the time.
If you want to connect the printer
and computer with a LAN cable
If you are using Windows Vista, you can
detect the printer automatically using the
WSD (Web Service on Devices) protocol.
You can select the type of the printer driver
("UFR II", "UFR II XPS", "PCL5e", "PCL6",
"PS3", or "XPS (Direct)") to be installed on
the automatically detected printer in this
item.
[Mng. Settings]
[Settings Key Lock] [Off], [On]
When you set to [On], [
] (
:Settings) is locked and you cannot
operate the Setup menu.
When you set to [Off], [Settings Key Lock]
is not locked.
You can unlock the locked Settings key
only from the Remote UI.
[Adjust Screen]
㻡㻢㻢㻌㻛㻌㻥㻣㻜