Cisco MDS 9000 Series

Figure 26: Edit Local Full Zone Database Dialog Box
Step 3 Select the member(s) you want to add from the Fabric pane (see Figure 26: Edit Local Full Zone Database Dialog Box,
on page 72) and click Add to Alias or click the alias where you want to add members and click the Insert icon.
You see the Add Member to Alias dialog box (see Figure 27: Add Member to Alias Dialog Box, on page 72).
Figure 27: Add Member to Alias Dialog Box
The Device Alias radio button is visible only if device alias is in enhanced mode. For more information, see
Creating Device Aliases, on page 161 section.
Note
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
72
Configuring and Managing Zones
Adding Members to Aliases