A53 Z0 9 0020 L En Technical documentation
Mains reached a minimum of kW.
Mains reached a minimum of kW.
The oil pressure reached the minimum
threshold (Analog input F8-F9).
The water temperature reached the maximum
threshold (Analog input F6-F7).
Battery is in under voltage.
Battery is in over voltage.
An oil pressure fault has been detected.
(Digital input set as Oil pressure fault).
A water temperature fault has been detected
(digital input set as Water temperature fault)
If the digital input is used as a protection,
l’Alarm/Fault will be activated.
If the virtual input is used as a protection,
l’Alarm/Fault will be activated.
To Next Page
Loading...
Need help?
General
