Dell Force10 S4810P - Page 456

456 | High Availability
www.dell.com | support.dell.com
linecard 4 invalid 6.5.1.8
linecard 5 is not present.
Note: [b] : booted [n] : next boot
Upgrade cache boot image(4.7.5.427) for all cards [yes/no]: yes
cache boot image downloading in progress...
!!!!!!!!!!!!!!!!!!!!!
cache boot upgrade in progress. Please do NOT power off the card.
Note: Updating Flash Table of Contents...
Erasing TOC area...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Upgrade result :
================
All cache boot image upgraded to 4.7.5.427
FTOS#
View your cache boot configuration using the command show boot system all, as shown in the example
below.
FTOS#show boot system all
Current system image information in the system:
=============================================
Type Boot Type A B
----------------------------------------------------------------
CP DOWNLOAD BOOT 4.7.5.427 invalid
RP1 DOWNLOAD BOOT 4.7.5.427 invalid
RP2 DOWNLOAD BOOT 4.7.5.427 invalid
linecard 0 DOWNLOAD BOOT 4.7.5.427 invalid
linecard 1 is not present.
linecard 2 is not present.
linecard 3 is not present.
linecard 4 DOWNLOAD BOOT 4.7.5.427 6.5.1.8
linecard 5 is not present.
FTOS#
If you attempt to cache a system image that does not support the cache boot feature, Message 8 appears.
Verify that the system is configured to boot with the selected cache boot image using the command
show
bootvar
as shown in the example below.
FTOS#copy running-config startup-config
File with same name already exist.
Proceed to copy the file [confirm yes/no]: yes
!
10496 bytes successfully copied
1d6h32m: %RPM0-P:CP %FILEMGR-5-FILESAVED: Copied running-config to startup-config in flash by
default
R4_E300#show bootvar
PRIMARY IMAGE FILE = system://4.7.5.427
Message 8 System Image does not Support Cache Boot Error
%% Error: Given image is not cache boot aware image.