Need help?Do you have a question about the Esterline CMA-9000 and is the answer not in the manual?
General| Channels | 12 |
|---|---|
| Power Supply | 28 VDC |
| Type | GPS Receiver |
| Update Rate | 1 Hz |
| Velocity Accuracy | 0.1 m/s |
| Time Accuracy | 100 ns |
| Interface | ARINC 429 |
| Operating Temperature | -40°C to +70°C |
Illustrates the FMCDU front panel arrangement and its display partition.
Outlines essential preflight checks for the FMS: IDENT, POS INIT/REF, ACT RTE, SETUP, GPS SAT DESELECT, VHF NAV DESELECT, RADIO, PERFORMANCE VNAV.
Details the steps for FMS power-up, annunciator tests, display intensity adjustment, and verification of operational program and database.
Explains how to change the active database cycle, cautioning that existing routes are deleted.
Covers selecting custom and user routes, including activation and modification.
Covers initialization of Cruise, Fuel, and GPS Satellite Deselection parameters.
Explains setting the FMS to operate in synchronized or independent mode.
Details the procedure for selecting SID and runways, assuming only these portions are loaded.
Details managing approaches: new approach, modification, deselection, DME arc, procedure turns, and deletion.
Covers direct-to navigation for active, off-route, and inactive route waypoints.
Details direct-to navigation with intercept, including track/heading hold.
Explains managing holds at route waypoints, off-route, present position, modifying, exiting, continuing, and deleting holds.
Covers manual entry, deletion, viewing, and saving of user waypoints and routes.
Describes RNP capabilities, FTE, performance monitoring, and navigation modes (GPS, DME/DME, VOR/DME, Inertial).
Covers procedures for power interruptions, high temperature operations, and equipment deselection.
Details operations with failed TAS, Altitude, Heading inputs, and DR mode.
Details System Alert, Status Advisory, Data Entry Advisory, and Maintenance Advisory messages.
Covers overview, vertical profile, speed management, VNAV advisories, preflight, and performance initialization.
Details Takeoff, Climb, Cruise, Descent, Approach, and Go Around phases.
To Next Page