OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
APPR REF 2/2
The second APPR REF page displays the thrust reduction height and acceleration height for the destination
airport; these values can be over-written by the crew.
Display the APPR REF 2/2 page by pressing [INIT REF], <APPR REF>, [NEXT].
TITLE: The page title displays the name of the selected approach of the active flight plan when available.
VFE NEXT (1L): Field displays the lowest selectable speed for flaps V
FE
NEXT
APPROACH [6L]: Pressing this LSK provides direct access to the VNAV APPR page.
ERASE [6L]: "ERASE" is only displayed when an active flight plan modification is in progress. Pressing this key
will undo all changes to the active flight plan and return to the ACT Route status.
ACCEL HT [2R]:
ACCEL ALT [2R]:
Displays and allows crew entry of the acceleration height/altitude of the destination airport.
THR RED HT [3R]:
THR RED ALT [3R]:
Displays and allows crew entry of the thrust reduction height/altitude of the destination airport.
INIT/REF [6R]: Pressing this LSK provides direct access to INIT/REF INDEX 1/2 or 2/2 page.
ILS33R APPR REF 2/2
VFE NEXT
155KT
ACCEL HT
3000FT
THR RED HT
1500FT
<APPROACH INIT/REF>
Page RRJ-A-37
August 17, 2010
To Next Page
Loading...