OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 10-12
August 17, 2010
3. Confirm the resume hold procedure by pressing <EXEC> (LSK 6R).
The "RESUME HOLD" prompt is changed to EXIT HOLD, the status changes to IN PROGRESS, and the
<NEW HOLD> prompt is displayed. "MOD" status in the title line changes to "ACT", and the EXEC
annunciator extinguishes.
HOLDING PATTERN DELETION
A. PRIOR TO ENTRY
1. Display the desired holding waypoint by pressing [LEGS], [NEXT] or [PREV] as required.
2. Key in /.
3. Cancel the hold by pressing the appropriate LSK.
The
"/H" legend at the selected waypoint is deleted. The waypoint is NOT deleted from route.
4. Accept the modified route by pressing [EXEC].
B. AFTER HOLD ENTRY INITIATED
Perform any exit hold procedure.
To Next Page
Loading...