Esterline CMA-9000 - Setup 1;1

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page A-84
August 17, 2010
SETUP 1/1
This page allows the user to setup selected parameters. Display
SETUP 1/1 page by pressing [INIT REF] and <SETUP>.
DISPLAY [1L]: Display Reference of all courses, tracks and bearings and angular outputs to the EHSI. The
current state of the TRUE/MAG setting from the external TRUE/MAG input is dispayed in a small font.
FMS OPERATION [5L]: FMS cross-talk mode of operation. Toggle optionsDefaults to SYNCHRONIZED. Mode
changes need to be confirmed (Field is not displayed if the FMS is configured not to be synchronized. In
synchronized. mode, ">" prompt is not displayed if configured as “ALWAYS”).
POS INIT [6L]: Accesses the POS INIT/REF 1/3 page.
ROUTE [6R]: Accesses the RTE 1/1 page.
1R
2R
3R
4R
5R
6R
FMS1 SETUP 1/1
DISPLAY
MAG
FMS OPERATION
>SYNCHRONIZED
<POS INIT ROUTE>
1L
2L
3L
4L
5L
6L
DRAFT