Esterline CMA-9000 - Diversion to Alternate

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
1.13 Diversion to Alternate
Diversio te airport can be planned using either the Modified ACT-ive route or the Second route
function.
n to an alterna
Modified route
:
1. Update the active flight plan destination airport, approach p
speed/altitudes. This re
rocedure and/or
sults in the automatic computation of the vertical profile for the
e.
ns, then press [EXEC] when
diversion to the alternat
2. Verify the lateral flight plan and vertical profile and predictio
cleared to the alternate by ATC.
Second route (refer to previous section)
:
1. Prepare the flight plan to the alternate airport using the Second route function.
2. Activate the Second route to generate a new vertical profile in the Modified route.
3. Verify the resulting vertical profile and predictions, then press [EXEC] when cleared to the
alternate by ATC.
Page F-53
August 17, 2010
DRAFT