OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
VFR APPROACHES
Display the ARRIVALS 1/X page for the desired airport by pressing DEP/ARR.
NOTE: If the DEP/ARR INDEX 1/1 page is displayed, select the desired arrival airport by pressing the
appropriate <ARR> prompt (LSK 1R or LSK 2R).
PANC ARRIVALS 1/1
STARS RTE 1 APPROACHES
AMOTT5<ACT> <SEL> 06L
TRANS
ODK <ACT>
1. If an approach is already selected, delete it by pressing LSK 1R.
All approaches and runways are listed.
2. Display the desired runway by pressing [PREV] or [NEXT] as required and select it by pressing the
appropriate right hand LSK.
The APPROACHES field title is replaced by RUNWAYS with the selected runway displayed below it with the
legend "<SEL>".
3. Display the MOD RTE x LEGS 1/X page by pressing [LEGS].
The runway threshold waypoint is inserted into the route preceded by a route discontinuity.
4. Create an initial approach fix at a suitable distance from the runway threshold on the backwards extension
of the runway heading using a place/bearing/distance temporary waypoint.
NOTE: The temporary IAF is optional since direct-to navigation to the runway threshold intercepting the
inbound course will accomplish the same result.
5. Make the modified route active by pressing [EXEC].
Direct-to navigation to the temporary IAF, or to intercept the inbound leg to the runway threshold will provide
the necessary navigation and guidance.
<ERASE ROUTE>
Page 7-12
August 17, 2010
To Next Page
Loading...