OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
PREFLIGHT
1. IDENT - check software version number. Check Configuration Number. Check active database date and
interchange if necessary.
2. POS INIT/REF – If GPS is available, check aircraft present position, time and date. Otherwise, manually
enter the system and/or IRS position (for alignment).
3. MOD, ACT RTE, DEPARTURES - enter route, confirm FMS flight plan matches clearance.
4. ACT RTE LEGS - check all course and distances between waypoints of the active route.
5. SETUP - check display reference (MAGNETIC, TRUE).
6. GPS SAT DESELECT –check that GPS satellites are not deselected or deselected according to NOTAMs.
7. VHF NAV DESELECT – deselect any applicable VHF navaids as per NOTAMs.
8. RADIO - check frequencies.
9. PERFORMANCE VNAV – refer to VNAV section for additional VNAV related preflight steps
A detailed description of each display page is contained in Appendix A. Radio display pages are detailed in
Section 13.
Page 3-2
August 17, 2010
To Next Page
Loading...