OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
1.7.6 Required Time of Arrival in Cruise
constraint is assigned to a Cruise or Descent waypoint, the FMS will command a Cruise target speed
nds of the desired time. To assign an RTA to a
1. Enter the desired waypoint
2. Enter the Required Tim
3. Press [EXEC].
When an RTA is active, RT e at 3L.
If a time
that meets the Required Time of Arrival (RTA) within 30 seco
waypoint:
at [1L] from the RTA PROGRESS page.
e of Arrival at [1R].
ACT RTA PROGRESS 3/4
RTA WPT RTA
MILPA 2125.0z
RTA CRZ SPD DIS
.760 123nm
UTC
2100.0z
ETA TO MILPA
2125.7z
FIRST -RTA WINDOW- LAST
2122.4z 2130.0z
A speed will display on the CRZ pag
ACT RTA CRZ 3/4
CRZ ALT MAX
FL350 FL390
MFUEL SPD
.787
RTA SPD
.760
{SCHED ENGINE OUT}
{DES FORECAST PROFILE}
Page F-35
August 17, 2010