OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
1.8.17 Approach Preparation
The APR REF pages display reference data related to the approach.
rformed using first the
1. S
2. E based on the selected approach type.
3. Enter the app
(V
REFx
V
LS
) [1L, 2L, 3L and 4L
respectively].
NOTE(S): Before the E/D, the predicted values of the approach reference speeds are computed based on
the airplane predicted landing weight.
Passed the E/D, the approach reference speeds are computed based on the airplane current
gross weight and configuration.
The approach reference speeds can be manually modified if required.
5. Verify the consistency of the FMS-computed Final Approach Speed (V
APP
) displayed at [5L].
VORD07L APPR REF 1/2
VREF1 LDG CONF
211kt FULL{
VREF2 MIN BARO
191kt 700ft
VREF3 MIN RADIO
149kt
APPR Vls APPR WIND
128kt 100`/10kt
Vapp
137kt
{APPROACH INIT/REF}
VORD07L APPR REF 2/2
VFE NEXT
155KT
ACCEL HT
3014ft
THR RED HT
1514ft
{APPROACH INIT/REF}
Preparation for the approach should occur before the E/D is sequenced and can be pe
APPR REF 1/2 page:
elect the planned Landing Configuration (FULL or CONF3 ) at [1R].
nter the MIN BARO (MDA-DA) [2R] or MIN RADIO (DH) [3R]
roach wind [4R].
4. Verify the consistency of the FMS-computed Approach Reference Speeds
Page F-47
August 17, 2010
To Next Page
Loading...