Esterline CMA-9000 - Downtrack Fix Creation; Position Fix Info Display

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
POSITION FIX INFO DISPLAY
With the desired waypoint identifier in the scratchpad:
Display the FIX INFO 1/1 page by pressing [FIX] or [INIT REF], <FIX INFO>.
1. Enter the waypoint identifier in the scratchpad and move it into the FIX field by pressing LSK 1L.
The bearing (radial) and distance FROM the FIX to the aircraft are displayed. The displayed reference of the
bearing (radial) (e.g. true or magnetic North) is consistent with the other navigation angles as described in the
SETUP page in Section 3.
2. Display the reciprocal by pressing REF (LSK 1R).
DOWNTRACK FIX CREATION
With the desired reference waypoint identifier in the scratchpad:
Display the FIX INFO 1/1 page by pressing [FIX] or [INIT REF], <FIX INFO>.
1. Move the waypoint identifier into the "fix" field by pressing LSK 1L.
1
R
2R
3R
4R
5R
FIX INFO 1/1
FIX CRS/DIS REF
ANN 310
o
/ 456NM TO<
-- DOWNTRACK FIXES --
RAD/DIS DTG ETA
---
o
/---NM
---
o
/---NM
<ABEAM
1L
2L
3L
4L
5L
6L
6R
FIX INFO 1/1
FIX CRS/DIS REF
ANN 310
o
/ 466NM TO<
-- DOWNTRACK FIXES --
RAD/DIS DTG ETA
175
o
/ 80 NM 420NM 2033.0Z
<ABEAM
<ERASE FIXES
ANN175.0
1R
2R
3R
4R
5R
6R
/
79.9
1L
2L
3L
4L
5L
6L
Page 5-20
August 17, 2010
DRAFT