Esterline CMA-9000 - Manual Entry of an Airport Type User Waypoint in the Database

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
2. Enter the waypoint identifier in the ID field at LSK 1L.
3. Enter the position at LSK 1R or enter the Bearing/Distance at position LSK 2L. By entering a
Bearing/Distance, the FMS computes a position using as reference the present position and displays the
coordinates of the user waypoint to be displayed on LSK 1R. The number of available waypoints are displayed
in the “FREE=“field (a maximum of 460 user waypoints can be defined).
4. When the mandatory fields are filled (e.g. name and position of the new user waypoint), a
CANCEL/CONFIRM prompt is displayed. Press <CONFIRM> to accept (LSK 6R) or <CANCEL> (LSK
6L).
B. MANUAL ENTRY OF AN AIRPORT TYPE USER WAYPOINT IN THE DATABASE
Access the USER WPT 1/2 page by pressing [INIT REF], <NAV DATA> (LSK 1R), and <NEW USER WPT>
(LSK 6L).
1. Enter the waypoint identifier in the ID field at LSK 1L.
2. Enter the position at LSK 1R or enter the Bearing/Distance at LSK 2L.
NOTE: The steps 1 and 2 can be replaced by entering a known identifier in LSK 4L and defining a
radial/distance from the reference position to the desired user waypoint position.
3. Press [NEXT] to display the USER WPT 2/2 page.
4. Toggle Identifier type (WAYPOINT, AIRPORT) at LSK 1R and select AIRPORT.
5. Enter the airport ELEVATION at LSK 5R (mandatory field). When the mandatory fields are completed
(e.g. name and position of the new user waypoint), a CANCEL/CONFIRM prompt is displayed. Press
<CONFIRM> (LSK 6R) to accept or <CANCEL> (LSK 6L).
1R
2R
3R
4R
5R
USER WPT 1/2
ADFF ID/POS ACT RTE
N45
o
12.23 W043
o
32.12
BRG/DIS
223
T
/115NM
TYPE
FIXED
REF WPT ID RAD/DIS
ADED 000
o
/0.00NM
REF WPT POS
N45
o
12.23 W043
o
32.12
<CANCEL SAVE? CONFIRM>
1L
2L
3L
4L
5L
6L
6R
Page 11-3
August 17, 2010
DRAFT