Esterline CMA-9000 - Calc;Conv 1;2; Calc;Conv 2;2

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page A-4
August 17, 2010
CALC/CONV 1/2
Display CALC/CONV 1/2 page by pressing [INIT REF], [NEXT], <CALC/CONV>.
TOTAL[1L]: The data field displays the result for a mathematical operation when the equal sign operator is
pressed at LSK 6R. The default value is set to zero and is displayed in normal white font.
SUB-TOTAL [3L]: The data field displays the current result of a mathematical operation in normal white font
when one of the following operators is selected: +, -, *, or /.
CLEAR [5L]: Pressing this key will clear the total and sub-total data fields to zero.
INIT/REF [6L]: Access to the previously displayed INIT/REF INDEX page
+ [1R]: The data field displays the addition operator. Pressing the LSK will update the sub-total field with the
current result and will select the addition operator for the next operation.
- [2R]: The data field displays the subtraction operator. Pressing the LSK will update the sub-total field with the
current result and will select the subtraction operator for the next operation.
* [3R]: The data field displays the multiplication operator. Pressing the LSK will update the sub-total field with
the current result and will select the multiplication operator for the next operation.
/ [4R]: The data field displays the division operator. Pressing the LSK will update the sub-total field with the
current result and will select the division operator for the next operation.
= [6R]: The data field displays the equals operator. Pressing the LSK will update the total field with the current
result and clear the sub-total field.
1R
2R
3R
4R
5R
6R
CALC/CONV 1/2
TOTAL OPERATORS
0 +
-
SUB-TOTAL
-1.12 + *
/
>CLEAR
<INIT/REF =
1L
2L
3L
4L
5L
6L
DRAFT