Esterline CMA-9000 - SWITCHING RTE 1 to RTE 2

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
7. Prior to pressing <ACTIVATE>, <ERASE> (LSK 6L), may be used to cancel activation.
8. The LEGS page title legend changes from MOD to ACT. The former inactive route, now active, is
displayed in multiple colors.
9. The previously active route’s TO and subsequent waypoints now form the inactive route (displayed in
cyan).
C. SWITCHING RTE 1 to RTE 2
Activation of the Inactive route results in a modified route consisting of the waypoints of the Inactive route,
starting at the Top waypoint location on the MOD RTE x LEGS page.
The previously active route becomes the inactive route but retains its route number. Either RTE 1 or RTE 2
may be either active or inactive. The route status is effectively toggled between the two.
NOTE: The system allows maximum 99 temporary waypoints in a flight plan.
Page 5-33
August 17, 2010
DRAFT