OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page A-83
August 17, 2010
SELECT WPT {name} 1/X
Automatically displayed on entry of a waypoint identifier that has duplicates in the navigation database.
TITLE LINE: Displays duplicated waypoint identifier.
WAYPOINT DESCRIPTION [all LSK's]: Displays all unique locations which are associated with the common
identifier. Title line of each waypoint indicates ICAO region code, ICAO country code (or terminal area airport
identifier) and waypoint type (refer also to explanation of NAV DATA 1/1 page). Waypoints are sorted in the
following manner:
a. For manual insertions into the route, waypoints are listed in order of increasing distance from the previous
flight plan waypoint.
b. For Direct-To procedures, waypoints are listed in order of increasing distance from present position.
c. For custom routes, resolution of duplicated waypoints occurs automatically, with the waypoint closest to the
previous flight plan waypoint being selected.
Pressing one of the appropriate LSKs will automatically select the waypoint description and return to the
previous page from which this page was accessed. The waypoint identifier will then be displayed on the line
where entry was previously attempted.
NOTE: The ICAO region field will be blanked if the waypoint is found from the Custom or User database, or the
waypoint is a temporary waypoint.
SELECT WPT MEL 1/1
EUR LF VHF NAV
N48
o
27.35 E002
o
48.83
EUR LJ NDB NAV
N45
o
39.33 E015
o
18.67
To Next Page
Loading...