Esterline CMA-9000 - Message Recall 1;X

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page A-36
August 17, 2010
MESSAGE RECALL 1/X
Only system alert messages are displayed on this page. All messages are displayed in amber, with the latest
identified by a leading asterisk *.
System alert messages will cause both the FMS MSG annunciator and the remote FMS MSG annunciator to
illuminate until all new alert messages have been cleared/acknowledged by the pilot. Once all alert messages
have been viewed either via the scratchpad or by going to the MESSAGE RECALL page, the FMS MSG
annunciator and the remote FMS MSG annunciator will turn off.
NOTE: All current alert messages may be acknowledged simultaneously by display on the MESSAGE RECALL
1/X page.
These messages are removed automatically when the conditions which caused them have been corrected.
Display MESSAGE RECALL 1/1 page by pressing [INIT REF], and <MSG RECALL> or the [MSG] key (if
available). Pressing the [INIT REF] key for more than 1 second will automatically access this page.
MAINT MSG [6R]: Access to MAINT MESSAGES 1/X page. Prompt appears only if there are maintenance
alert or maintenance advisory messages.
1R
2R
3R
4R
5R
6R
MESSAGE RECALL 1/1
F 1
*MC FAILED 1
1INDEPENDENT OP 1
MAINT MSG>
1L
2L
3L
4L
5L
6L
DRAFT